2018/10/26

Witech Micropod2 Clone Registration Error (Solved)

Here's the working solution to wiTech Micropod 2 clone Chrysler diagnostic tool registration problem.


Error:
"Registration is needed
Device with serial number*** is not registered. Please check the knowledge
base to determine how to register a device"
witech-register-device-error

Obdii365.com engineer solution:

Right click wiTech Diagnostic Application-> Properties->Open file location
solve-witech-register-error-1
C:/Program Files (x86)/DCC Tools/wiTECH/client
solve-witech-register-error-2

Open app-config text file
solve-witech-register-error-3
Change the first number to any value marked red above. 
i.e change 6 to other numbers, 1-9
Then save the text file. (Very important!!!)

Run Witech Micropod II software again
If witech still prompts  error " an internal registration error has occurred ", just ignore by clicking no icon to close it.
solve-witech-register-error-4

Problem solved.
Then tick “Offline” on the bottom left corner (Don’t need to login)
Run diagnostic software.
solve-witech-register-error-5
Video guide:
How to solve Witech Micropod 2 registration error
www.obdii365.com

No comments:

Post a Comment