2021/02/01

How to Configure WiFi for wiTech MicroPOD2?

Let me get straight to the point. Here is the WiFi setting guide of the new released WiFi version wiTech MicroPod 2 V17.04.27 diagnostic scan tool for Chrysler Jeep Dodge and Fiat.

 

 

 

How to configure a Wireless Profile on a MicroPOD2?

Preparation:

On a PC with the wiTECH V17 software application installed

Iwifi version share the same installation procedure as non-wifi version micropod2.

Check: http://blog.obdii365.com/2017/07/25/install-witech-micropod-2-v17-04-27-on-windows-7/

 

 

Then plug MicroPod II interface into the OBD2 port of your vehicle. The indicator will turn green, it means it car is charging the device.

Meanwhile use the USB cable to connect one laptop (Dell, Lenovo etc) with installed V17.04.27 wiTech software

witech-micrpod-2-wifi-setting-1

Connect wireless WIFI on the computer.

witech-micrpod-2-wifi-setting-2

Enter IP “172.22.22.22” into the address bar of an Internet browser.

witech-micrpod-2-wifi-setting-3

This opens the Witech setting interface

Select “Wireless Settings” in the menu on the left

witech-micrpod-2-wifi-setting-4

 

Profile is set to “Default”.

witech-micrpod-2-wifi-setting-5

 

Click on “Save”.

witech-micrpod-2-wifi-setting-6

 

Wireless Settings saved. To enable this wireless profile, click on “Manage Networks”.

You can close this page and return to configuring the device by clicking on the close button below.

witech-micrpod-2-wifi-setting-7

Next operation is to click on “Manage Networks” -> Wireless (tick it off) -> Select & Start.

Once the connection is complete you will see an IP address populate for the wireless interface

Success, close it.

witech-micrpod-2-wifi-setting-8

witech-micrpod-2-wifi-setting-9

Back to click on “Manage Networks”,  now we can see “Currently Selected”, and 172.22.22.22 is enabled, which means the wireless connection is set successfully.

witech-micrpod-2-wifi-setting-10

 

Video reference:

 https://youtu.be/cfpQFpkwVV8

 

V17.04.27 wiTech MicroPod2 Wifi setting is done successfully.



https://www.obdii365.com/service/set-up-wifi-connection-on-micropod-2.html

2021/01/27

WIFI WiTech MicroPod 2 Online Programming Guide

I would like to share a good news with all you, WiFi WiTech MicroPod 2 is now available at obdii365.com. It has two nice features: one is to connect via WIFI, another one is to do online programming with TechAuthority account. In the following parts, let’s have a look at how does online programming work.

 

Firstly, we prepare:

A WiFi WiTech MicroPod 2;

A Chrysler ECU box with a dashboard ( dismantled from the car) ;

A Computer with WIN7 OS and WiTech V17.04.27 software installed.

TechAuthority account ( buy from https://www.techauthority.com/)

wifi-witech-micropod2-online-program-1

wifi-witech-micropod2-online-program-2

Tips:

Online version: can connect internet when working.
Multi-language: English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese

Procedure:

Vehicle View – Configurating Diagnostic Sessions – Connecting to device.

wifi-witech-micropod2-online-program-3

wifi-witech-micropod2-online-program-4

 

Loading vehicle menu data.

wifi-witech-micropod2-online-program-5

 

VIN Check:

Witech was unable to read the VIN. Attempt to cycle the ignition into the RUN position before continuing. Note: If no keys are programmed and vehicle is unable to go into RUN, continue and enter the VIN, then there will be a dialogue saying ” Please enter an VIN. ”

wifi-witech-micropod2-online-program-6

 

Come to “All DTCs”.

Double-click row selection to view environmental data. Click on column heading to sort table.

Here we have one DTC, and we notice the “Online” icon is in green color, means the online programming is available; otherwise it is red color and name as “Offline”).

wifi-witech-micropod2-online-program-7

wifi-witech-micropod2-online-program-8

Alright, with online programming, what can MicroPod 2 can do next? Let’s read the description of  Tech Authority Online:

Subscriptions provide access to:

Technical Service Bulletins & Recalls for domestic vehicles – 1992 to present.

Service Information – 1992 to present.

Wiring information – 1996 to present.

Diagnostic information – 1992 to present.

Online functionality of FCA diagnostic scan tool (also requires an active wiTECH Scan Tool and Vehicle Reprogramming Subscription)

 

NOTE: Some Wiring and Diagnostic procedures may be found under the Service Information Tab.

 

Body repair Information, Training Materials, Ability to view JTEC, SBEC and FCC related OBD II calibration information.

 

Vehicle controller reprogramming, Flash Matrix with Flash part numbers and part supercedance. Capability to download Flash files for updating controllers. (also requires an active wiTECH Scan Tool and Vehicle Reprogramming Subscription)

 

Note: If you are purchasing a subscription to only Flash a module on a vehicle, verify that a Flash is available by referencing one of the following PDF files. (also requires an active wiTECH Scan Tool and Vehicle Reprogramming Subscription)

 

Okay, you will be very happy by paying only 130used for one Wifi V17.04.27 wiTech MicroPod 2 Diagnostic Tool for Chrysler Dodge Jeep Fiat at:

https://www.obdii365.com/wholesale/wifi-witech-micropod-2-diagnosis.html

 

2020/08/02

Possible to use Witech to write vins on a 2015+ Dodge?

Purpose: to perform a PCM replaced procedure to learn/synch the skim / write vins on a 2015+ Dodge.

Question:
I have a good quality micropod II clone registered for online use with Witech 17. Is this possible? If yes, how?
My micropod clone has firmware version 2.4 and is registered so works with witech 17.04 software and tech authority online.


Suggestion:
if you can use your clone micropod 2 while witech software is online, yes you can perform “restore vehicle configuration” and program the car mileage into the pcm.
you need online account for this of course.. But sellers does not provide online account. 

Test reports for sharing:
Did not work… “0x42 unable to write vin, retry restore procedure”.


What to do next?
  1. Do you have any launch scanner tool? easydiag will do the pcm vin and miles change.
    as for the skeem learn for a used pcm is not needed as long the vin on the pcm matches the rest of the modules in the car, should work fine.

  1. Also it is possible to write VIN into Dodge PCM using Launch X431 Diagun IV (discontinued and replaced by X431 Diagun V).

Car model: 2002 Dodge Ram Van 1500
1). Click PCM module
diagun-v-write-vin-to-dodge-1
2). Special function
diagun-v-write-vin-to-dodge-2

3). Check PCM Vin
diagun-v-write-vin-to-dodge-3

4).writing Vin
diagun-v-write-vin-to-dodge-4

5).New Vin
diagun-v-write-vin-to-dodge-5

6).Vehicle Vin is Valid,successful!
diagun-v-write-vin-to-dodge-6

  1. Also Autel tools has the ability to write the VIN into Dodge.
the Autel MaxiSys tools (i.e Maxisys Elite) do have the ability to write VIN. Specific function availability will varies by year and model.
Here is an example of the VIN writing options for a 2006 Dodge Ram.
autel-maxisys-write-vin-to-dodge-1

The “Check VIN” function works the same as other scan tools, if there is no VIN in the PCM it will then allow you to write the VIN number to the module.

Details for the Autel Maxisys coverage are available on this page:
autel-maxisys-write-vin-to-dodge-1

1 – Select the Autel Tool from the list (i.e. MS906, Elite, Mx808, etc.)

2 – Select a Vehicle Manufacturer

3- Select a Vehicle Model

4- Select the Vehicle Year

5- Click Search

Coverage will be listed in an undetermined order, grouped by System. (ABS/Engine/Airbag)
You can use the Function box to narrow the search.

2020/07/16

How to Program Chrylser RKE with DRB III Scan Tool?

All  you need to do is program old fob (RKE) to the replacement CTM using DRB-III after get a CTM replaced. This is confirmed using an official DRB-III emulator and WiTech VCI pod.
Programming the RKE (Remote Keyless Entry) transmitter access codes requires the use of a DRB III scan tool, so if you need to replace one or want a spare you’ll need to visit your local dealer to have this done.

programming methods A thru D. Only Methods A thru C are applicable to Jeep vehicles and only from 1999 to 2002. Methods A & B are Customer Programing Methods that can be found elsewhere on other websites. Method C is a Dealer Programming Method that requires the use of a DRB III scanning tool.

SUBJECT:
Remote Keyless Entry (RKE) Programming Procedures
MODELS:
1999 – 2002 (AB) Ram Van/Wagon
1999 – 2002 (AN) Dakota
1999 – 2002 (BR/BE)Ram Pickup
1999 – 2002 (DN) Durango
2002 (DR) Ram Pickup
2001 – 2002 (JR) Sebring Sedan/Stratus Sedan/Sebring Convertible
2002 (KJ) Liberty
1999 – 2002 (LH) Concorde/Inytrepid/LHS/300M
1999 – 2000 (NS) Town & Country/Caravan/Voyager
1999 – 2002 (PL) Neon
1999 – 2002 (PR) Prowler
2001 – 2002 (PT) PT Cruiser
2001 – 2002 (RS) Town & Country/Caravan/Voyager
1999 – 2002 (WJ) Grand Cherokee
1999 – 2001 (XJ) Cherokee

NOTE: PLEASE READ INSTRUCTIONS FULLY BEFORE ATTEMPTING TO PROGRAM TRANSMITTERS.
Program Method A (Customer Program Method)
1. Press (LOCK) button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to run position. (Allow ignition chimes to stop).
3. Using any original (working) transmitter, press the [UNLOCK] button for 4 to 10 seconds.
4. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and press the [PANIC] button for 1 second and release both buttons (AN/DN release
either button first). A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound).
5. Press [LOCK] and [UNLOCK] buttons simultaneously for 1 second and release (a short chime will sound for AN/DN).
6. Press and release any button on the same transmitter and a chime will sound after successfully programming the transmitter (locks will cycle for AN/DN).
NOTE: (FOR DR 0NLY ) A CHIME WILL NOT SOUND ON STEP #6 FOR THE FIRST TRANSMITTER PROGRAMMED, BUT WILL SOUND UPON PROGRAMMING THE SECOND TRANSMITTER.
7. Repeat steps 5 through 6 to program additional transmitters.
8. Turn ignition to OFF position. Transmitter programming mode will discontinue after 60 seconds (30 seconds for AN/DN and RS). (All transmitter programming must be completed within time specified).

Program Method B (Customer Program Method)
1. Press [LOCK] button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to the run position (Allow ignition chimes to stop).
3. Using original transmitter, press and hold the [UNLOCK] button on the transmitter for between 4 and 10 seconds.
4. Continue to hold the [UNLOCK] button and press the [PANIC] button. A chime will sound to indicate that the transmitter programming mode has been entered (Allow 3 seconds for chime to sound).
5. Press a button on all transmitters to be programmed into the system including any previously programmed transmitters; a chime will sound when each transmitter has been programmed.
6. Turn the ignition to OFF position to exit the transmitter programming mode.

Program Method C (Dealer Program Method) *Can be used for any type transmitter.
1. Press [LOCK] button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.
2. Turn ignition to the run position (Allow ignition chimes to stop).
3. Plug DRB III to vehicle’s 16–way data link connector.
4. Follow Service Manual and DRB3 instructions to program transmitters.

Program Method D (For use with AB vehicles not equipped with VTSS only)
1. Locate the dark green program enable wire connected to pin #1 of the 16-way data link connector under the left side of the instrument panel.
2. Connect the program enable wire terminal to a good ground.
3. Insert the key into the ignition and turn the ignition switch to the ON position. The power locks will cycle (Lock and Unlock) indicating that program mode has been entered.
4. Using the transmitter to be programmed, press either [LOCK] or [UNLOCK]. The power locks will cycle indicating the transmitter has been programmed successfully.
5. Repeat step 4 to program additional transmitter.
6. Disconnect the program enable wire from ground to exit program mode.
7. Turn the ignition to the OFF position and remove the key.
NOTE: REFER TO DAIMLERCHRYSLER MDS2 SYSTEM OR PARTS DEPARTMENT TO OBTAIN THE CORRECT PART NUMBER AND REVISION FOR SPECIFIED VEHICLE.

Example: Programming new RKE  remotes/FOBs for the Jeep Cherokee XJ
Just for sharing purpose. Credit to http://colorado4wheel.com.
This is a “how-to” reprogram the RKE (Remote Keyless Entry) remotes/FOBs in the Jeep Cherokee XJ. This procedure is the same for 1997-2001 Cherokees, 1997/1998 Cherokees use a different remote than the 99-01 Cherokee that seems to interchange with all 97-01 Cherokee’s. 1996 and older Cherokees have a different programming procedure for the IR remotes. In theory it would be possible to swap in a programmed pair of remote and board to a 1996 and older for the improved remote range.
From the main menu, select #1, DRBIII standalone.
drb-iii-program-chrysler-rke-1
Select #1, 1998-2007 Diagnostics.
drb-iii-program-chrysler-rke-2
Select #1, All.
drb-iii-program-chrysler-rke-3
Select #7, Theft Alarm.
drb-iii-program-chrysler-rke-4
Select #1, VTSS.
drb-iii-program-chrysler-rke-5
Detecting.
drb-iii-program-chrysler-rke-6
This will display after first detection.
drb-iii-program-chrysler-rke-7
Select #9, Miscellaneous.
drb-iii-program-chrysler-rke-8
Select #3, Program RKE.
drb-iii-program-chrysler-rke-9
If the ignition is not off, turn it off.
drb-iii-program-chrysler-rke-10
Select which position remote you want to program for. Defaults are 1 and 2, Recommend having all the remotes available for programming, otherwise another remote might get overwritten.
drb-iii-program-chrysler-rke-11
The RKE will accept a signal for a few seconds, press unlock repeatedly during this time. After the end of the cycle this will display, even if the programming was not successful. Test the remote by pressing lock and unlock, if it does not activate then it is not working properly and either needs to be programmed again or it is a bad remote.
drb-iii-program-chrysler-rke-12
Select 1 to change the horn chirp duration.
drb-iii-program-chrysler-rke-13
10ms is almost inaudible, 40ms is very noticeable. User preference.
drb-iii-program-chrysler-rke-14
Illuminated entry can also be set. User preference.
drb-iii-program-chrysler-rke-15
While many remotes appear to be physically identical actual compatibility varies. Verify part numbers before purchasing remotes.