2022/08/28

wiTech Micropod2 Cannot to Register Mopar?

Problem:

I want to register witech micropod2 clone diagnostic scanner on Mopar.com. It won’t accept the serial number and reported an error ‘unable to register device’.

Any solution?

wiTech Micropod2 Cannot to Register Mopar 1

wiTech Micropod2 Cannot to Register Mopar 2

Solution:

Chrysler tech authority for subscriptions use to work fine with clone micro-pod2 for programming with witech1 17.04 . Now Chrysler has changed from the normal site to now mopartsp.com that wants any obd tool registered and warning wiTECH 2.0 requires Mopar’s 2017 secure microPod II (WSP-31560 or above). The device you attempted to register to your account does not meet this criteria.

Ever since witech/tech authority moved to MoparTSP, micropod clones don’t work for ECU programming. This is down to all clones sharing the same serial number meaning you cannot get around the device registration.  The process to register and configure the software is difficult if you are not in USA.

There is a limited range of approved devices, any other legit J2534 devices might work, might not.

With cda6 offline its one option to do ecu programming.

 

http://blog.obdii365.com/2022/08/22/use-cda-6-14-with-witech-micropod-2/

2022/08/22

How to Make CDA6 Work with Micropod 2 Clone?

Possible to use CDA 6.13/6.14 with WITECH VCI POD or MicroPod 2 clone?

Make CDA6 Work with Micropod 2 Clone 0

CDA5 has been tested and verified working with both VCI Pod clone and Microped 2, works for basic stuff, like to change VINs, read/reset DTCs, unlock PCMs (at least a 2004 to level 3), etc.

How about newer CDA 6.13, 6.14 and 6.7?

It is a Yes. CDA 6 works with clone Micropod ii.

CDA6 is working only offline. This cannot be used to access any ‘online’ features. You can’t update online or automatic, need to get and select the correct flash file for the module first, but you can flash all modules with CDA6 and make many configurations, adjusts and modifications.

 

Support vehicles: Chrysler, Jeep, Dodge, Fiat
Works well with years till 2022

 

How to modify micropod2 clone with CDA6?

Micropod firmware downgrade is required. You can find Micropod2 firmware Downgrade Utility & SN changer tool on google.

Use the Micropod 2 software utility tool to downgrade a micropod 2 and changed the serial number, the micropod 2 works great with both CDA 6.14 and 6.7.

Make CDA6 Work with Micropod 2 Clone 1

Make CDA6 Work with Micropod 2 Clone 2

A note about the firmware utility.
People have a tested and verified a downgrade path from witech 2.0 to witech 1.0.
People have also extensively tested downgrading firmware versions of witech 1.0 to earlier versions of witech 1.0.
People have verified which firmware versions are needed for CDA 6.7 and CDA 6.13.